 A35:
Full Feature Cleaning in an Environmentally, Ergonomically,
and Economically Sound Package
The move to water based parts washing
is an investment for the future, but only if you the right
equipment. One look at the patented features and construction
of the Model A35 will tell you it's not only built for
convenient, low-cost cleaning, but also for years of safe,
dependable service. |
|
1. Effective cleaning in heated
solution. Safe, energy efficient thermostatically
controlled heater preset to 110 degrees F boosts cleaning
power
2. Sink soaking capacity up to 300 lbs. Accommodates
20 gallons of water (160 lbs) and still allows ample capacity
for soaking parts in accessible, oversize sink.
Flo-thru brush and sink stopper supplied
3. Solution
stays clean. Oil skimming features and sink drain
design keep surface oils from contaminating clean solution.
4. Trouble
free oil removal. Integrated weir continuously skims
floating oil from the sink. Accumulated oil is removed
through the weir drain valve from machine base.
5. No particulate
problems. Externally mounted unique bag type cartridge
filter captures abrasive materials when cleaning critical
parts and helps keep solution clean for a longer life.
|
6.
Operator safety. Includes GFI protection, high temperature
cutout, and an air actuated switch, operated by hand or
knee, that controls recirculating pump & separates
operator from electrical contact.
7.
Rugged high density polyethylene construction. No
worries about corrosion, dents, cracks, or peeling.
Double wall construction offers high strength.
8.
Low liquid level shut off/indicator light. Indicates
when solution should be added to machine. Automatically
shuts off heater and pump when fluid level gets too low
for safe operation.
9.
Easy access to machine base. Hinged sink tips to
the side for easy access to machine base.
10.
ETL Approved.
|
Return
to the main KleenTec/Kleer-Flo page