PowerMaster Parts
Washers- Agitated Immersion Cleaning Large
load, large volume cleaning tasks become push button simple
with heavy-duty PowerMaster immersion cleaners.
Electro-mechanical agitation moves the load through 138
vertical 4-inch strokes per minute. The powerful
surging action cleans inside and out- removes chips and
particles from blind holes. You gain speed and energy
efficiency conventional cleaners can't match.
PowerMaster units
are built to heavy industrial standards, with welded 10
gauge steel construction. Standard models clean
loads from 200 to 2000 pounds. PowerMaster units
are available in electrically heated models for use with
Degreasol aqueous
formulas. You can clean castings, dies, weldments,
engine blocks, cylinder heads and other large parts, as
well as baskets of smaller machine parts. Non-heated
models are also available, for use with Degreasol formulas
to remove oil, dirt, and grease. Only
PowerMaster has the patented Air Rise system
Fingertip pressure
on the control activates the unique Air Rise system, which
automatically lowers the work load into the chamber, and
simultaneously closes the tank cover before agitation
begins. Agitation stops when the cleaning cycle
is complete, and the cover opens automatically while the
work load rises out of the solution and flush with the
top of the cabinet for draining. There's no need
for cables, winches, pulleys or dangerous manual lifting
to remove parts from the solution. The Air Rise
design assures cover-closed cleaning, to increase both
safety and energy consumption.
Patented
Air Rise system reduces operating costs
With
the Air Rise system operator time is reduced . The
load is lowered automatically on the pneumatically controlled
platform, and the cover closes simultaneously. Agitation
begins when the cover closes and stops before the cover
opens. This exclusive system prevents unnecessary
heat loss, improves the working environment, and makes
it easier to comply with today's safety standards.
Advanced
standard features:
-
A
single control panel programs operations and monitors
solution temperature and level. It also permits
manual override of automatic operation
-
Patented
Air Rise system allows parts to be cleaned automatically.
It lowers parts into the solution and closes the cover
simultaneously, saving labor and increasing production
efficiency
-
Electro-mechanical
agitation moves the load through 138, 4-inch vertical
strokes per minute, to effectively clean and treat
all shapes and sizes. Electro-mechanical agitation
also consumes less electricity than compressed-air
agitation systems. And cleans faster.
You save energy, time and operating costs
-
Solutions
heated with electricity. The temperature in
each tank is thermostatically controlled
-
There
are 28 standard cleaning and treatment solutions and
chemicals. Others can be formulated for special
applications
-
PowerMaster
meets OSHA requirements and provides a safer environment
Products in the PowerMaster line:
Return
to KleerTec/Kleen-Flo main page |
